UTG ACCU-SYNC™ block mount 30mm rings
Significant weight savings without compromising durability
The integral scope mount comes from the new UTG Accu-Sync series and is milled out of a piece of aluminum using the CNC manufacturing process. In the UTG Accu-Sync series, the two rings attached to the integral mount are exactly aligned. The two words "Accu-Sync" therefore stand for Accuracy-Synchronized, which puts the target device precisely in the middle. The assembly is thermally coated in a matte black finish to provide a protective coating that will continue to perform reliably in the field.
Due to the offset of 34 mm, the existing rifle scope can be perfectly adapted to the shooter and placed on the rifle. In order to reduce the weight of the bracket, so-called "lightening cuts" were milled in by the manufacturer.
All edges and corners are rounded off in the integral assembly to avoid snagging, scratching or tearing other objects. The rounded edges also prevent injuries to the hands when adjusting the aiming device.
This UTG Accu-Sync Integral mount is also equipped with the well-known square anti-recoil device. This is integrated five times and locks completely with the Picatinny slots on the rifle. This eliminates the back and forth movement of the rings associated with standard mounting rings, which occurs when firing due to recoil vibration.
The scope of delivery consists of an integral mount, each equipped with four Torx screws for attaching the scope. The width of the rings is specified by the manufacturer as 25 mm. The distance between the two rings is approx. 44 mm.
Universally suitable for all 20 - 22 mm rails (Mil-Spec 1913 Picatinny Rails).
- Colour: matt black
- Material: aluminum
- Ring diameter: 30 mm
- Ring width: 25 mm
- Ring Spacing: 44mm
- Offset: 34mm
- Height 22mm
- Weight: Approx. 147g
- Suitable for: 20 - 22 mm rails (Mil-Spec 1913 Picatinny Rails)